Product Features
·30W MAX wireless flash charging
·Induction telescoping
·Dual heat dissipation
·Intelligent compatibility
·One-hand operation
·2 installation methods
Product parameters
Product model: WO3ZM
Input parameters: 5V~20V-3.25A MAX
Output parameter: 30W MAX*
Sensing distance: ≤ 4mm
Product size: about 117.2 x 73.4 x 96.7 mm
Working temperature: 0 ℃~30 ℃
Warm tips
*To achieve 30W wireless output power, you need to use a Xiaomi mobile phone that supports 30W wireless input.
Packing list:
Xiaomi Wireless Car Charger × 1
instructions × 1
Power Cord × 1
On-board Charger × 1
Flat Paste Base × 1
Duckbill Clip × 1
The expanding arm can reach up to 81.5mm, accommodating most wireless charging-compatible phones on the market, making it easy to insert devices like the Redmi K60 or iPhone 14 Pro Max.
1. 30W max high: Power rapid charging
2. Electric Transformable Clamping Arm: Hidden Infrared Sensor for Convenience
3. Dual Cooling for Enhanced Safety and Efficient Phone Cooling
4. Smart Compatibility: Multiple Device Models
5. One-Hand Operation: Just place your phone gently, and it locks automatically
6. Two Installation Options: Choose your preferred installation method
Induction-type electric clamping arm. Single-handed unlock, for safe driving.
Built-in hidden infrared sensor, the clamping arm automatically unfolds and locks when the phone approaches. Even during emergency braking, passing over speed bumps, or on bumpy roads, the phone is less likely to fall off. Multi-angle free and stepless adjustment allows the phone to be fixed in both horizontal and vertical positions according to your preferences.
Drive, Navigate, and Charge Simultaneously without Plugging in or Removing the Case
Simply reach out and place your phone to charge, or use the side button to detach it with one hand. The expanding arm can reach up to 81.5mm, accommodating both large and small screens. The effective charging induction distance extends to 4mm, allowing charging even with phone cases.
The Radiant Circular Light and Curved Glass Elevate Both Aesthetics and Performance
Utilizing an integrated 2D glass material as the charging surface, it enhances the car charger's heat dissipation efficiency, making charging even faster. After connecting the power, the blue circular welcome light illuminates, ensuring clarity during nighttime drives.
Dual Cooling with Independent Fan and Metal Heat Sink, Multiple Protections
The car charger features an independent fan that can intelligently adjust its speed based on the temperature to actively dissipate heat. It also incorporates a built-in metal bracket for efficient passive heat dissipation. During high-power charging, the dual cooling system helps reduce the potential drop in charging power caused by overheating, significantly reducing charging time. Additionally, it offers multiple protections, ensuring safety against various issues like short-circuits and overvoltage.
①Temperature Protection
②Overvoltage Protection
③Short-Circuit Protection
④Foreign Object Detection
⑤Power Protection
⑥Dual Cooling System
Dual Ports with 46W MAX Output for Simultaneous Charging of Two Devices
The included dual USB-A car charger in the package supports various fast-charging protocols. The USB-A1 and USB-A2 ports can charge two smart devices simultaneously, with a total power output of up to 46W MAX.
Quick Installation in One Minute with Two Options to Choose from
Easily install the bracket by holding it and inserting it into the air vent using the crocodile clip. Alternatively, you can use the included flat adhesive base for a secure mount, suitable for various car models and positions.
A. Comes with an adhesive base suitable for multiple car models
B. Flexible silicone protection to prevent damage to the air vent
C. Custom Adapter Included at No Extra Cost
D. The base has a reserved interface, so even non-wireless charging smartphones can be used with it without the need for an additional purchase.
*The 30W high-power wireless charging feature of the Xiaomi Wireless Car Charger requires the use of the included Xiaomi standard in-car charger to function. It is compatible with various Xiaomi models such as Xiaomi 10, Xiaomi 10S, Xiaomi 10 Pro, Xiaomi 11, Xiaomi 11 Pro, Xiaomi 11 Ultra, Xiaomi MIX 4, Xiaomi 12, Xiaomi 12 Pro, Xiaomi 13, Xiaomi 13 Pro, Redmi K60, Redmi K60 Pro, and others. Please note that it does not support 5V/2A car charger input.
*Test data is derived from a controlled environment. The Redmi K60 Pro tested was running system version MU1 140.22 and was tested in a car using the provided in-car charger. The phone was in screen-off airplane mode during testing.
*To achieve 30W wireless output power, it is required to use a smartphone case with a thickness less than 4mm and ensure that the case does not contain any metal materials.
*The mounting surface should be clean and flat. Due to the strong adhesive on the back, forcefully removing it after installation may damage the car interior. It is recommended to seek assistance from a professional organization for removal.
*For the charger to deliver 30W of wireless output power, it should be used with a Xiaomi phone that supports 30W wireless input.
Package Contents:
①Xiaomi wireless car charger × 1
②Car charger adapter × 1
③User Manual ×1
④Flat Paste Base × 1
⑤Power cable × 1
⑥Goose Neck Clamp ×1
Winner of the German iF Design Award
Established in 1953 and annually awarded by the iF Industrie Forum Design in Hanover, it is one of the world's most prestigious design awards, often referred to as the 'Oscars of the Product Design Industry
Notes:
*The Xiaomi wireless car charging 30W high-power wireless charging function needs to be realized with the attached standard car charger, which is compatible with Xiaomi 10, Xiaomi 10S, Xiaomi 10 Pro, Xiaomi 11, Xiaomi 11 Pro, Xiaomi 11 Ultra, Xiaomi MIX4, Xiaomi 12, Xiaomi 12 Pro, Xiaomi 13, Xiaomi 13 Pro, Redmi K60, Redmi K60 Pro, etc., and does not support 5V/2A car adapter input.
*The test data is from Kuke Laboratory. The tested Redmi K60 Pro system version is MIUI14.0.22 stable version. The test environment is the standard car charger red port at standard room temperature, and the mobile phone is in black screen flight mode.
*It is necessary to use a mobile phone case with a thickness of less than 4mm, and confirm that there is no metal material inside and outside the mobile phone case.
*The bonding surface shall be clean and flat. Due to the strong adhesion of the adhesive backing, forced removal after adhesion may damage the car interior. It is recommended to contact a professional organization for treatment.
